A unique product for optimal friction and anticorrosion performance
GEOMET® 500 is applied to fasteners and many type of metallic parts to protect from corrosion, and it is used in many industries
• Thin dry-film, non-electrolytic, self-lubricated
• Water-based chemistry
• Passivated zinc and aluminium flakes in a binder, patented chemistry
• Metallic silver appareance
Characteristics and performance *
• Coefficient of friction: 0,15 ± 0,03 (ISO 16047)
• No topcoat required
• No hydrogen embrittlement
• Excellent assembly and multi-tightening behavior
• Good mechanical damage (test method D24 1312, USCAR 32) and chemical
(test VDA 621-412) resistance
• Performance maintained at elevated temperatures (up to 300°C)
• Paintable coating
• Electrical conductivity for most application
• Bimetallic compatibility with aluminum
• Application cost savings
High corrosion resistance*
Coating Weight Salt Spray Test (ISO 9227 / ASTM B117) Cyclic Test
Grade A > 24 g/m2 > 240 hours without white rust > 720 hours without red rust 25 cycles APGE
Grade B > 36 g/m2 > 240 hours without white rust > 1000 hours without red rust 6 cycles ACT 50 cycles APGE
* Results may vary depending on substrate, geometry of parts and type of application processes
Application process
GEOMET® 500 can be applied by Dip-Spin, Spray, Dip-Drain-Spin using bulk or rack
Health and Safety
• Aqueous dispersion
• Complies with REACh
• Complies with the 2000/53/CE and 2002/95/CE directives
Among our worldwide specifications
• PEUGEOT / CITROËN (B 15 3320)
• FIAT (Capitolato 9.57513)
• FORD (S447 & S448)
• INTERNATIONAL TRUCK (TMS 4523)
• IVECO (18-1101)
• JAGUAR CARS & LAND ROVER (ST JLR.50.5050)
• SCHNEIDER ELECTRIC (ABD 00048)
• SNCF / RATP (ST001-01)
• BOSCH (0 204 Y81 074 Code H)
• JOHN DEERE (LaN 930-11.4)
International standards
EN ISO 10683 – Fasteners: non-electrolytic zinc flake coatings
EN 13858 – non-electrolytic zinc flake coatings on iron and steel parts
ASTM F1136 / F1136 M – Zinc/Aluminum Corrosion Protective Coatings for Fasteners
